Did you know we hold good stock of many of our 'mainstream' products in our Lancashire warehouse? We visited yesterday and it's incounter units as far as the eye can see!https://t.co/uEgIBED3k5https://t.co/XR1GuwE0uU pic.twitter.com/31ciysIqOE
— Mobile UK Ltd (@mobileukltd) January 29, 2020 ]]>
Our special dispensers are available as ambient or heated and in one or two stack configuration. Drawings are available upon request.
We hope you find this of interest!
]]>We are able to powder-coat these units in a range of colours so that they are in-keeping with the servery area’s design.
If you have an application for this type of unit, we would be happy to help develop a unit to meet your customer’s requirements.
]]>Mobile UK’s unique selling point is the capability to customize many of our products. We can provide dispensing and holding solutions for almost any type of crockery, cup, napkin or tray. As you can see from the below image, we are also able to design units to hold a combination of items!
If you have a requirement for a customised unit, we would be happy to help develop a solution.
]]>
Our spring-loaded self-levelling plate dispensers provide ergonomic benefits to the user. The addition of a heated plate dispenser to a counter also enhances the perceived quality of the products offered. Hot food served on warm plates means fewer complaints about cold meals, increasing customer retention and satisfaction.
We offer two standard types of incounter plate dispenser which are available either heated or ambient. Both ranges are fitted with a multi-spring mechanism to give easy adjustment for different plate weights. This adjustment – the addition or removal of springs – is straightforward for an end user to carry out.
Our ‘T(H)’ range comprises of three models for different plate sizes. These units have moveable guide rods, giving an 80mm adjustment between the smallest and largest plate each model will accept. The heated dispensers have an adjustable thermostat which is incorporated into the power supply cable, and an on/off rocker switch mounted in the flange.
The ‘DFE’ range consists of 6 models, with both heated and ambient variants available. These units have fixed guides meaning a smaller tolerance between the smallest and largest plate accepted by each unit. The dispenser mechanism in the heated DFE version is removable from the outer casing for cleaning and maintenance. Heated units are controlled by a remote thermostat and on/off switch mounted in a control panel.
Across both the T(H) and DFE ranges, the same factors must be taken into consideration when specifying them: the plate size, the flange diameter, the cut-out diameter and the undercounter depth. We are equipped and happy to advise on the ideal unit for the installation!]]>Mobile UK Limited, the crockery dispensing specialist, have recently returned to CaterQuotes.
Approximately 100 items including plate dispensers, soup wells and the Liqui-Dispose waste liquid receptacle are available to view on the system.
Users can now easily locate prices, specifications and user manuals and include Mobile UK’s products in their quotations.
Sales Administrator Lucy Connell says: “We wanted to make it as straightforward as possible for dealers to specify our units. All the necessary information is on the CaterQuotes platform to facilitate this. CaterQuotes users can also contact us to discuss custom made products. We can solve almost any crockery handling problem.”
Mobile UK aims to be the preferred supplier of crockery and cutlery handling systems to servery manufacturers, specialist kitchen supply contractors and catering equipment dealers throughout the UK and Ireland. The company offers a wide range of quality products, competitive prices and quick and reliable delivery times from its UK warehouse.
]]>
Liqui-Dispose by Mobile UK Limited – the new product which facilitates disposable cup recycling.
Function:
The Liqui-Dispose holds liquid drained from cups before they are disposed of, facilitating disposable cup recycling. The Liqui-Dispose reduces spillages when emptying waste bins.
Construction:
The Liqui-Dispose’s inner tube is fabricated from PVC and is fitted with a removable stainless-steel strainer to prevent non-liquid material entering the drainage system. The strainer has a built-in level indicator to show when it’s full. A drain valve located in the base of the unit makes it easy to empty and clean. Incounter, floor and wall-mounting variants are available.
An introduction:
We’re very interested in carrying out a Liqui-Dispose field trial at one of your locations – we’d be delighted to bring a unit along to show you. If this is something you’d like to be involved with, please contact us using the details below. We hope you’ll agree that the Liqui-Dispose could be a very useful addition to your current waste or recycling systems!
Mobile UK Limited
Tel: 01706 868160
]]>