T(H) SERIES ADJUSTABLE
INCOUNTER DISPENSERS
 

UNHEATED ADJUSTABLE

Click to download product manual.

Click to download product leaflet.

Click on product code to download AutoCAD® drawings.
 
           

Product code
Model
Plate diameter
Cutout diameter
Flange diameter
Depth below counter
Price £
             
01.1220.02
T245
150-220
306
317
660
335.00
01.1230.02
T280
180-260
342
359
660
335.00
01.1240.02
T310
210-290
370
382
660
335.00
01.1290
TX for oval plates)
180x180 to 295x295
372x372
390x390
645
520.00
 
           

General specification: Incounter unheated plate dispenser. With three adjustable guide rods mounted through circular flange, with ‘flat’ guide tops. Capacity of approximately 55-60 plates. Multispring mechanism to give easy adjustment for different plate weights. Generally finished in stainless steel.
               
               

HEATED ADJUSTABLE

Click to download product manual.

Click to download product leaflet.

Click on product code to download AutoCAD® drawings.
               
Product code
Model
Plate diameter
Cutout  diameter
Flange diameter
Depth below counter
Price £
03.1610.02
TH245
150-220
306*
317
670
586.00
03.1620.02
TH280
180-260
342*
359
670
586.00
03.1630.02
TH310
210-290
370*
382
670
586.00
03.1670
THX (for oval plates)
180x180 to 295x295
372x372
390x390
670
916.00
 
           
* These cutout diameters apply to counter tops up to 2 mm thick. It is permissible to increase the diameter of the cutout by up to 4 mm to facilitate fitment of the dispenser in thicker counter tops.

General specification: Incounter heated plate dispenser. With three adjustable guide rods mounted through circular flange, with ‘flat’ guide tops. Capacity of approximately 55-60 plates. Multispring mechanism to give easy adjustment for different plate weights. Generally finished in stainless steel. Heating element of 400W, located in base, controlled by fixed 70°C thermostat. Fitted with rocker switch and neon protected from ingress of moisture by a neoprene cap. Supplied with cable and plug. Operates from 230V - 50HZ - 1PH electric supply.

 
           

Option for heated units to be thermostatically controlled by remote (up to 1500mm) thermostat, mounted in panel. Panel cut out 148 high mm x 86 mm wide.

For fixing detail click

  No cost option
95.7002.BOX Control panel back box, requires 149 x 90 mm cutout 42.00

 

  
           
Drawing for back box fixed through a counter panel AutoCAD® or as a PDF
 
Drawing for back box fixed on a counter panel AutoCAD® or as a PDF
   

 
For lids click

 

  
DFE SERIES FIXED
INCOUNTER DISPENSERS - NEW CONCEPT
 

UNHEATED FIXED

Click to download product manual.

Click to download product leaflet.

Click on product code to download drawings

 

              

Product code
Plate diameter
Cutout diameter
Flange diameter
Depth below counter
Price £
  
01.1210.02 145-160 243 254 650 287.00

01.1323.NC

160-208

288

300

650
287.00

01.1333.NC

190-238

318

330

650
287.00

01.1343.NC

230-278

358

370

650
287.00

01.1353.NC

260-308

388

400

650
287.00

01.1363.NC

290-338

418

430

650
329.00
 
General specification: DFE New Concept incounter plate dispenser, with four fixed guides. Circular flange with ‘flat’ guide tops. Capacity of approximately 60 round plates, stacking height of 521 mm. Multispring mechanism to give easy adjustment for different plate weights. Stacking unit with 8 Teflon rollers. Generally finished in stainless steel.
 
               

HEATED FIXED

Click to download product manual.

Click to download product leaflet.

Click on product code to download drawings
               

Product code
Plate diameter
Cutout diameter
Flange diameter
Depth below counter
Price £
  

03.1713.NC

160-208

288*

300

670

586.00

03.1723.NC

190-238

318*

330

670

586.00

03.1733.NC

230-278

358*

370

670

586.00

03.1743.NC

260-308

388*

400

670

586.00

03.1753.NC

290-338

418*

430

670

636.00
* These cutout diameters apply to counter tops up to 2 mm thick. It is permissible to increase the diameter of the cutout by up to 2 mm to facilitate fitment of the dispenser in thicker counter tops.
General specification: DFE New Concept incounter heated plate dispenser, with four fixed guides. Circular flange with ‘flat’ guide tops. Capacity of approximately 55-60 round plates, stacking height of 521 mm. Multispring mechanism to give easy adjustment for different plate weights. Stacking unit with 8 heat resistant Teflon rollers. With DFE outer casing with heating element of 400W, located in base, controlled by fixed thermostat. No switch or neon. Operates from 230V - 50HZ - 1PH electric supply. Supplied with cable and plug. Generally finished in stainless steel. The dispenser mechanism is easily removable from the heated casing for cleaning and maintenance.

 

  
           

Option for heated units to be thermostatically controlled by remote (up to 1500mm) thermostat, mounted in panel. Panel cut out 148 high mm x 86 mm wide.

For fixing detail click

  No cost option
95.7002.BOX Control panel back box, requires 149 x 90 mm cutout 42.00

 

  
           
Drawing for back box fixed through a counter panel AutoCAD® or as a PDF
 
Drawing for back box fixed on a counter panel AutoCAD® or as a PDF
   

 
For lids click

 

  
     
Back to